GOST 380-88

ГОСТ 380-88

Common quality carbon steel. Grades

Сталь углеродистая обыкновенного качества Марки

Status: Not effective - Superseded. IUS 9-1997

The standard applies to carbon steel of ordinary quality. Carbon steel of ordinary quality is manufactured by the following brands: St0, St1kp, St1ps, St1sp, St2kp, St2ps, St2sp, St3kp, St3ps, St3sp, StZGps, StZGsp, St4kp, St4ps, St5ps, St5ps, St5ps, St5ps, St4ps, St4ps, St4ps, St5ps, St3ps The letters St designate "Steel", the numbers - conditional number of the brand depending on the chemical composition of steel, the letters "kp", "ps", "cn" - the method of deoxidation ("kp" - boiling, "ps" - semi-calm, "c" - calm)

Стандарт распространяется на углеродистую сталь обыкновенного качества. Углеродистую сталь обыкновенного качества изготовляют следующих марок: Ст0, Ст1кп, Ст1пс, Ст1сп, Ст2кп, Ст2пс, Ст2сп, Ст3кп, Ст3пс, Ст3сп, СтЗГпс, СтЗГсп, Ст4кп, Ст4пс, Ст4сп, Ст5пс, Ст5сп, Ст5Гпс, Ст6пс, Ст6сп. Буквы Ст обозначают «Сталь», цифры - условный номер марки в зависимости от химического состава стали, буквы "кп", "пс", "сп" - способ раскисления ("кп" - кипящая, "пс" - полуспокойная, "сп" - спокойная)

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/30/1988

SKU: RUSS16023

Price: $58.00

English keywords: carbon steel grades; metallurgy;



The Product is Contained in the Following Classifiers:

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V20 Classification, nomenclature and general rules »


The Document is Replaced With:

GOST 380-94: Normal quality carbon steel

As a Replacement Of:

GOST 380-71: Common quality carbon steel. Grades

The Document References:

GOST 17745-72: Steel and alloys. Method for the determination of the content of gases

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-77: Carbon steel and unalloyed cast iron. Methods for determining aluminum content

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.1-77: Carbon steel and unalloyed cast iron. Methods for determining the content of total carbon and graphite

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-77: Carbon steel and unalloyed cast iron. Method for the determination of phosphorus content

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-77: Carbon steel and unalloyed cast iron. Method for the determination of silicon content

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-77: Carbon steel and unalloyed cast iron. Method for determination of arsenic content

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-77: Carbon steel and unalloyed cast iron. Methods for determination of chromium content

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-77: Carbon steel and unalloyed cast iron. Methods for determination of nickel content

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

The Document is Referenced By:

ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements

ATK 24.202.08-90: Ball valve valve four-flow plates for column type devices. Construction and main dimensions

ATK 24.202.12-90: Mesh bumpers made of corrugated hose. Parameters, design and main dimensions

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-02-1-89: Direct-flow valve plates for column-type devices. Options. Construction and main dimensions

ATK 26-02-2-89: Four-flow straight valve plates for column-type apparatus. Options. Construction and main dimensions

ATK 26-02-3-89: Mesh plates with baffle elements for column type devices. Options. Construction and main dimensions

ATK 26-02-4-89: Trapezoid valve plates for column type apparatus. Parameters, design and main dimensions

ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 10527-84: Four-wheel bogies of passenger cars for mainline railways gauge 1520 mm. Specifications

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 10778-83: Spatulos. Specifications

GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds

GOST 10791-89: Solid rolled wheels

GOST 10935-82: Freight box cars of mainline railways, gauge 1520 mm, technical requirements

GOST 11042-90: Construction steel hammers. Specifications

GOST 11108-70: Hard-metals bits for core exploratory drilling in medium hard. Specifications

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 11775-74: Moulding mallets. Design

GOST 12.4.091-80: Plastic miner's helmets

GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 13.1.303-88: Reprography. Micrography. Photo-thermoplastic films. General technical conditions

GOST 13578-68: Lightweight concrete panels on porous aggregates for external walls of industrial buildings. Technical requirements

GOST 13663-86: shaped steel pipes technical requirements

GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications

GOST 13781.3-79: Couplings of for power cables with paper insulation for 20 and 35 kV Sets of parts and installation materials. Specification

GOST 1405-83: Pinch and wrenching steel bars. Specifications

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 15876-90: Gauges for products made from wood and wooden materials

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 16556-81: Grounding rods for mobile electrical equipment

GOST 17053.2-80: Inserts for ship shock absorbers АКСС-М. Specifications

GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17390-72: Supporting pins of plastics moulds and die casting dies. Construction and dimensions

GOST 17391-72: Supports for guide pins and guide bushings of plastics moulds die casting dies. Construction and dimensions

GOST 17621-89: Coals. Method for determination of moving-liquid products yield from plastic mass of coal

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18381-80: Steel pins for aerial communication lines. Specification

GOST 18514-73: End caps for rolling bearing blocks. Technical requirements

GOST 18578-89: Builders axes. Specifications

GOST 19570-74: Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements

GOST 19596-87: Spades

GOST 19597-94: Garden rakes

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 2015-84: Fixed plain gauges. Technical requirements

GOST 20425-75: Concrete Tetrapod for Costal Protecting Installations

GOST 20539-75: End mills with solid carbide tips and with spiral carbide blades. Specifications

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions

GOST 21448-75: Alloyed powders for welding deposit. Specifications

GOST 21449-75: Rods for welding deposit. Specifications

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22326-93: Joints by flange dowels for wooden split patterns and core boxes. Design

GOST 22327-93: Cramp fixtures for wooden split core boxes. Design

GOST 22328-93: Wedge strainers for wooden split core boxes. Design

GOST 22329-93: Screw strainers for wooden split core boxes. Design

GOST 22330-93: Angles for wooden split core boxes. Design

GOST 22331-93: Plote lifting screws for wooden cast patterns. Design

GOST 22332-93: Strip lifting screws for wooden cast patterns. Design

GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design

GOST 22334-93: Trunnions for wooden cast patterns. Design

GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications

GOST 22584-88: Rope electric hoists. Specifications

GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions

GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23338-91: Methods of definition of the diffusion hydrogen content in deposited and seam metal

GOST 23344-78: Steel windows. General specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23540-79: Lifting leaf chains with closed spindles

GOST 23707-95: Small tools for tillage

GOST 24037-90: Asbestos-polymer seal sheet materials. Method of test for resistance to liquids

GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction

GOST 24184-80: flanges on two tension hoops Design and basic dimensions

GOST 24190-80: Branch pipes. Design

GOST 24198-80: Brackets. Design

GOST 24199-80: Regulated brackets. Design

GOST 24992-2014: Masonry structures. Method of estimating bonding strength in masonry

GOST 25010-81: Howks for plastering. Specifications

GOST 25084-89: Universal dies with replaceable built-up tool sets

GOST 25298-82: Compact treatment plants for domestic sewage water. Types, basic parameters and dimensions

GOST 25573-82: Freight handling rope slings for construction

GOST 25593-83: Diamond pastes

GOST 25594-83: Honing diamond bars

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 26145-84: X-ray medical cassettes

GOST 26225-93: Natural wool. Method for determination of degree yellowing

GOST 26251-84: Galvanium anodes for corrosion protection. Specifications

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 26339-84: Annular diamond drills

GOST 26584-85: Motorcycle helmets

GOST 26589-94: Roofing and waterproof mastics. Methods of testing

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method

GOST 28012-89: Demountable travelling stage. Specifications

GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30352-96: Diamond grinding wheels for treatment of household and art glass

GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements

GOST 4153-93: Pruning shears

GOST 4648-71: Plastics. Method of static bending test

GOST 5037-97: Metal cans for milk and dairy products

GOST 5257-89: Rough carbon steel tires for tramway rolling stock

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5521-86: Weldable steel for shipbuilding

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 7945-86: Scoops for finishing works. Specifications

GOST 7948-80: Steel construction plumbs-lines. Specifications

GOST 8142-89: Rail soles for R18, P24, P33 rail types

GOST 8483-81: Fishing taps and overshots for prospecting

GOST 8591-76: The telephone canalization cable man-hole hatches

GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring

GOST 9.402-80: Metal surface preparation for painting

GOST 9.504-85: Unified system of corrosion and ageing protection. Materials of packing on paper base. Method of testing protective capability

GOST 9074-85: Joined by pins slot cloths

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9539-72: Thread rolls. Specifications

GOST 9650-80: Pins. Specifications

GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications

GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods

GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods

GOST R 53266-2009: Fire equipment. Fire saving cord. General technical requirements. Test methods

GOST R 53268-2009: Fire equipment. Fire safety belt. General technical requirements. Test methods

GOST R 53272-2009: Fire equipment. Fire rope descanters. General technical requirements. Test methods

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 24.090.51-86: Clamps for steel ropes. Technical conditions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-82-77: Welding in chemical mechanical engineering. Main provisions and technology.

OST 26-01-84-78: Steel welded seams of pressure-operated vessels and devices. Magnetic-particle method.

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-02-601-72: Support lattices under ring packing. Main dimensions and technical requirements.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.

OST 26-11-04-84: Steel vessels and devices. Allowable stress.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-2091-93: Horizontal support vessels and equipment. Design.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.

OST 34-10-755-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-10-756-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 36-18-77: Device for truing of vertical and tower vessels. Design, dimensions and specifications.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PI 249-2000: Riveting of metal structures. application

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

R 001-98: Guide to the design of steel structures of objects of large-volume blast furnaces

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 12.18.099-90: Instructions for the design and installation of reinforcement for vertical shaft shafts with fastening reinforcement elements on anchors

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.44.06-89: Low loader semi-trailers. Repair Specifications

RD 34.03.204: Safety rules when working with tools and accessories

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.

RD 34.21.322-94: Procedural Guidelines for Organization and Execution of Inspections of Settling of Foundations and Deformations of Buildings and Structures Under Construction and in Service at Thermal Power Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD RTM 26-07-241-79: Surfacing of sealing surfaces of pipeline fittings with monel metal

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.

RST RSFSR 508-75: Electric Guitar. General technical requirements

RST RSFSR 678-82: Cast-iron stoves. General technical conditions

RST RSFSR 746-88: One-sided carriages. General technical conditions

RTM 108.030.21-78: Calculation and design of thermal deaerators

RTM 26-07-141-73: Details of pipe valves. Heat treatment of billets made of carbon and alloyed structural steels.

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SNiP 3.06.04-91: Bridges and pipes

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)

TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths

TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications

TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines

TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates

TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 102-416-86: Garage reinforced concrete prefabricated for individual use

TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use

TU 102-463-88: Frameless three-layer roofing panels with mineral wool insulation

TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation

TU 102-46-75: Weights prefabricated cantilever type UKS

TU 102-79: Concrete belt weighting compounds type UE for main pipelines

TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines

TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf

TU 2513-001-00152081-93: Glues 51-K-10V. Technical specifications

TU 26-14-100-90: Single cyclones of the type СЦН-40 of the right and left execution. Technical conditions

TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20135-94: Tubular air heaters of stationary boilers. Technical conditions for major repairs

TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 36-26-11-5-89: Expanded steel sheets. Technical conditions

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided

TU 5216-067-36910961-97: Fences are road, holding, for cars, side, of the first type in one-sided and two-sided execution.

VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!