GOST 11534-75

ГОСТ 11534-75

Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

Ру��ная дуговая сварка. соединения сварные под острыми и тупыми углами Основные типы, конструктивные элементы и размеры

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 696 dated 05.16.91

The standard establishes the main types, structural elements and dimensions of welded joints of structures made of carbon and low alloyed steels, performed by manual arc welding with consumable electrode in all spatial positions with the thickness of the metal being welded up to 60 mm inclusive with the location of the welded parts at acute and obtuse angles. The standard does not establish the types, structural elements and dimensions of welded joints of pipelines and welds performed by deep penetration welding.

Стандарт устанавливает основные типы, конструктивные элементы и размеры сварных соединений конструкций из углеродистых и низколегированных сталей, выполняемых ручной дуговой сваркой плавящимся электродом во всех пространственных положениях при толщине свариваемого металла до 60 мм включительно с расположением свариваемых деталей под острыми и тупыми углами. Стандарт не устанавливает типы, конструктивные элементы и размеры сварных соединений трубопроводов и сварных швов, выполняемых сваркой с глубоким проплавлением.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: State Committee of Standards of the Council of Ministers of the USSR, 12/12/1975

SKU: RUSS16115

Price: $102.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Defects »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »


As a Replacement Of:

GOST 11534-65: Seams of welded connections. Manual arc welding. Basic types and structural elements (at a sharp and obtuse angle)

The Document is Referenced By:

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 12393-2013: Line fittings for overhead system of railways. General common requirements

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 13276-79: Overhead line hardware. General specifications

GOST 13531-74: Concrete placers for precast reinforced concrete factories

GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 16140-77: Collapsible racks. Specifications

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 23074-85: Fertilizer placers for liquid organic fertilizers

GOST 23118-2012: Building steel structures. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23484-79: Electrohydraulic-plants for removing of cores. Technical requirements

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 24259-80: Assembling equipment for temporary fastening and adjusting structural members of building. Classification and general technical requirements

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31174-2017: Gates of metall. General specifications

GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34329-2017: Formworks. General specifications

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements

GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7496-84: Beet harvesters

GOST 7623-84: Outdoor drainage pipes. Specification

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50821-95: Fibrous mist eliminators. Their types and main parameters. Safety requirements. Methods of testing

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing

GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing

GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods

GOST R 52085-2003: Formworks. General specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55525-2017: Storage systems. Adjustable pallet racking. General specifications

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements

GOST R 57381-2017: Storage systems. Hand loaded steel static shelving. General specifications

GOST R 58174-2018: Basket trolleys. Specifications

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 58863-2020: Production tables. Metal workbenches. General specifications

GOST R 58864-2020: Tool cabinets made of metal. General specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

MDS 12-41.2008: Assembly equipment for temporary fixing of prefabricated elements of erected and dismantled buildings

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions

OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.940.09-74: Welded joint seams. Main types and design elements.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-04-2388-79: Welding by melting of the steels. Welded connections. Types, constructive elements and dimensions.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 34-10-621-93: Welded branches bearing. Types and basic dimensions.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PGVU 021-92: Unified dust and air duct elements. Welded assemblies of blocks and elements of ducts of dust and gas air ducts of thermal power plants. Design and dimensions

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 32 TsV-056-97: Freight cars of 1520 mm gauge railways. Quick Release Guide

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 5.0679-91: Certification of welders and gas cutters. rules

RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SNiP 3.03.01-87: Bearing and enclosing structures

SP 16.13330.2011: Steel structures

SP 294.1325800.2017: The construction of steel. Design rules

SP 46.13330.2012: Bridges and pipes

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures

VSN 41.88: Design of ice-resistant stationary platforms

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!