GOST 10705-80

ГОСТ 10705-80

Electrically welded steel tubes. Specifications

Трубы стальные электросварные Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 1247 of 07/12/91

The standard applies to steel electrowelded longitudinal pipes with a diameter of 10 to 630 mm made of carbon and low-alloyed steels used for pipelines and structures, as well as products for various purposes. The standard does not apply to steel pipes used for the manufacture of heat-electric heaters.

Стандарт распространяется на стальные электросварные прямошовные трубы диаметром от 10 до 630 мм из углеродистых и низколегированных марок сталей, применяемые для трубопроводов и конструкций, а также изделий различного назначения. Стандарт не распространяется на стальные трубы, применяемые для изготовления теплоэлектронагревателей.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: USSR State Committee for Standards, 12/25/1980

SKU: RUSS16650

Price: $100.98




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V62 Steel pipes and their connecting parts »


As a Replacement Of:

GOST 10705-63: Electrically welded steel tubes. Technical requirements

The Document References:

GOST 10006-80: Metal pipes

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions

GOST 162-90: Depth gauges. Specifications

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans

GOST 19045-80: Triangular throw-away (indexable) carbide cutting inserts with 11° end-clearance angle. Design and dimensions

GOST 19240-73: Rails for ground and suspended tracks. Dimensions

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2216-84: Adjustable smooth snap gauges

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 3728-78: Tubes. Method of bend-over test

GOST 380-2005: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8026-92: Levelling rules. Specifications

GOST 8693-80: Metal pipes. Method of flange testing

GOST 8694-75: Tubing (pipes). Expansion testing method

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 2015-84: Fixed plain gauges. Technical requirements

The Document is Referenced By:

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements

GOST 2056-77: Sectional bed for military men. Specifications

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications

GOST 31311-2005: Heating devices. General specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 5466-74: Soil transfering pipes

GOST 6856-54: Steel tubes

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 58180-2018: Gas distribution systems. Requirements for gas distribution networks. Part 5. The gas pipelines with the load-bearing framework coated with a sleeve with polymerizing coating

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MI 2220-13: Recommendation. State system for ensuring uniformity of measurements. Consumption and volume of waste liquid. Measurement technique in free-flow conduits by filling level with preliminary calibration of the measuring section

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.101.101-76: Water-steam heaters. Casings. Design and dimensions.

OST 108.101.107-76: Water-steam heaters. Aft water chambers (with flat bottom, four-way). Design and dimensions.

OST 108.101.110-76: Water-steam heaters. Covers. Design and dimensions.

OST 108.101.111-76: Water-steam heaters. Covers. Design and dimensions.

OST 108.313.101-76: Water-steam heaters. Casings. Unions. Design and dimensions.

OST 108.313.103-76: Water-steam heaters. Casings, branch pipes with flanges. Unions. Design and dimensions.

OST 108.318.104-76: Water-steam heaters. Forward water chambers . Tubing. Design and dimensions.

OST 108.318.105-76: Water-steam heaters. Forward water chambers . Connecting branch. Design and dimensions.

OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-577-93: Angular, single-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-42-569-82: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

OST 36-41-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Types and basic parameters.

OST 36-62-81: Hoisting equipment. General technical requirements.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes

RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate

RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 323-65: Instructions for use in the construction of thin-walled steel pipes with a conditional passage from 15 to 50 mm

SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry

SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of

SN 421-71: Consumption rates of materials, pipes, sanitary ware and heating devices for 1 million rubles. estimated cost of construction and installation works. Non-ferrous metallurgy

SN 425-71: Consumption rates of materials, pipes, sanitary wares and heating devices per 1 million rubles. estimated cost of construction and installation works. Ferrous metallurgy

SN 425-78: Consumption rates of materials and products for 1 million rubles. estimated cost of construction and installation works

SNiP 2.04.12-86: Steel pipelines strength analysis

SNiP 2.05.13-90: Oil-product pipelines laid on the territories of cities and other settlements

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SP 16.13330.2011: Steel structures

SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 294.1325800.2017: The construction of steel. Design rules

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 371.1325800.2017: Formwork. Design rules

SP 373.1325800.2018: Independent heat supply sources. Design rules

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 41-104-2000: Design of independent heat supply sources

SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 53-102-2004: General rules for steel structure design

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications

TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade

TU 14-3-67-72: Electrowelded pipes made of low-alloyed 16G2AF steel with a diameter of 219 and 273. Experimental batch. Technical conditions

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems

VSN 362-87: Disinfections and Etching of Pipelines

VSN 51-3-85: Design of field steel pipelines

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

GOST R 59634-2021: Snow retention systems. General specifications

KPO 04.03.13-06: Catalog-list of equipment. Instruments for measuring and regulating the flow, quantity, level and composition of a substance

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

Resolution: Rules for the design and safe operation of steam and hot water boilers

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

STN TsE 141-99: Design norms for contact network

TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications

TU 3680-001-04698606-04: Pipe Support

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $831.42
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!