GOST 10051-75

ГОСТ 10051-75

Metal covered electrodes for manual arc surfacing of upper layers with special properties types

Электроды покрытые металлические для ручной дуговой наплавки поверхностных слоев с особыми свойствами. Типы

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to metal coated electrodes for manual arc surfacing of surface layers with special properties. The standard does not apply to electrodes for guiding non-ferrous metal layers.

Стандарт распространяется на металлические покрытые электроды для ручной дуговой наплавки поверхностных слоев с особыми свойствами. Стандарт не распространяется на электроды для направки слоев из цветных металлов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 14

Approved: Gosstandart of the USSR, 10/23/1975

SKU: RUSS17066

Price: $159.03




The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 10. Production » 10.4 Surfacing »

Standards for pipe fittings (TPA) » 10. Production » 10.3 Welding »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »


As a Replacement Of:

GOST 10051-62: Metal electrodes for arc surfacing of surface layers with special properties. Types

The Document References:

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

The Document is Referenced By:

GOST 18580-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 4 MPa (40 kgf / cm2). Specification

GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification

GOST 23212-78: Units of versatile press tools for clipping. Specifications

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.

OST 26-07-2054-83: Pipeline fittings. Building up sealing surfaces of details with УОНИ-13/Н1-БК grade electrodes. Technical requirements.

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 26-17-049-85: Organization of storage, preparation and control of welding materials

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 31.52.21-88: Recommendations on selection of welding materials in enterprises of Ministry of Marine.

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $831.42
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!