GOST 12.2.008-75

ГОСТ 12.2.008-75

Equipment and facilities for gas-flame treatment of metals and thermal

Оборудование и аппаратура для газопламенной обработки металлов и термического напыления покрытий

Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1361 of 08/15/91

The standard applies to equipment and apparatus for flame treatment of metals (oxygen cutting machines; installations for local heating and surface hardening; installations for gas flux welding, soldering and surfacing; installations and apparatus for thermal spraying of coatings; torches and burners; gas; gearboxes; valves of oxygen and combustible gas cylinders) and establishes safety requirements for their design.

Стандарт распространяется на оборудование и аппаратуру для газопламенной обработки металлов (машины для кислородной резки; установки для местного нагрева и поверхностной закалки; установки для газофлюсовой сварки, пайки и наплавки; установки и аппараты газотермического напыления покрытий; резаки и горелки; посты газоразборные; бачки для жидкого горючего; редукторы газовые; вентили баллонов кислородных и горючих газов) и устанавливает требования к безопасности их конструкции.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 10/28/1975

SKU: RUSS17952

Price: $91.14




The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.3 Machinery and equipment for metallurgy »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.20 Surface Treatment »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.20 Surface Treatment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


The Document References:

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.023-80: Noise. Determination methods of stationary machine noise characteristics values

GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method

GOST 12.1.027-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Engineering method

GOST 12.1.028-80: System of the standards for safety of work

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 13861-89: Pressure regulators for the flame machining

GOST 16519-78: Portable tools. Methods for measurement of parameters of vibration

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 21753-76: Man -machine system control levers

GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements

GOST 22615-77: «Man-machine» system. Fumbler switches and commutators. General ergonomic requirements

GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 2904-91: Basic norms of interchangeability. Marks on the parts with the left thread

GOST 29090-91: Materials for equipment used in gas, welding, cutting and allied processes. General requirements

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8734-75: Seamless steel tubes cold deformed. Range

GOST 8856-72: Equipment for gas flame treatment. Fuel gas pressure

GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms

GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

The Document is Referenced By:

GOST 1077-79: Single-flame multi-purpose torches for oxy-acetylene welding, soldering and heating

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.055-81: Ferrous and nonferrous scrap and waste metal processing equipment

GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements

GOST 13047.1-81: Nickel. Methods for the determination of nickel

GOST 13861-89: Pressure regulators for the flame machining

GOST 13938.1-78: Copper. Methods for determination of copper

GOST 20996.0-82: Selenium. General requirements for methods of analyses

GOST 26100-84: Copper concentrates. Determination of lead, zinc, cadmium. Flame atomic absorption method

GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process

GOST 28724-90: Speed gas meters

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 5191-79: Injector cutting torches for manual oxygen cutting

GOST 5382-91: Cements and materials for cement production. Chemical analysis methods

GOST 741.1-80: Cobalt. Methods for the determination of cobalt

GOST 9816.0-84: Technical tellurium. General requirements for methods of analysis

GOST R 51063-97: Inert powder. Methods of testing

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 22-1260-78: Machine cutting torches for piled-plate cutting by means of reduced pressure oxygen. Specifications.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 36-50-86: Steel industrial pipelines. Heat treatment of welded joints. Template technological process

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.

RD 34.03.204: Safety rules when working with tools and accessories

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

TU 3645-001-05693446-98: Installation of SGN-1 supersonic gas-plasma spraying coatings

TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

GOST 5382-2019: Cements and materials of cement production. Chemical analysis methods

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $831.42
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!