GOST 5583-78

ГОСТ 5583-78

Industrial and medical gaseous oxygen

Кислород газообразный технический и медицинский

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to technical and medical gaseous oxygen obtained from atmospheric air by the method of low-temperature distillation, as well as to technical gaseous oxygen obtained by electrolysis of water.

Стандарт распространяется на технический и медицинский газообразный кислород, получаемый из атмосферного воздуха способом низкотемпературной ректификации, а также на технический газообразный кислород, получаемый электролизом воды.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: State Committee of Standards of the Council of Ministers of the USSR, 5/26/1978

SKU: RUSS19487

Price: $130.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.1 Products of main chemical industries »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.060 Inorganic chemicals » 71.060.10 Chemical elements »

National standards » 71 CHEMICAL INDUSTRY » 71.060 Inorganic chemicals » 71.060.10 Chemical elements »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L1 Inorganic chemical products » L11 Gases and elementary substances »


As a Replacement Of:

GOST 5583-68: Industrial and medical gaseous oxygen

The Document References:

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 10163-76: Reagents. Soluble starch. Specifications

GOST 12026-76: Filter paper for laboratory application

GOST 1277-75: Reagents. Silver nitrate. Specifications

GOST 13320-81: Automatic instruments of continuous action used for gas analysis. General requirements

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 26460-85: Air separation products. Gases. Cryogens. Packing, marking, transportation and storage

GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements

GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 3773-72: Reagents. Ammonium chloride. Specifications

GOST 4107-78: Reagents. Barium hydroxide 8-aqueous. Specifications

GOST 4201-79: Reagents. Sodium bicarbonate. Specifications

GOST 4232-74: Reagents. Potassium iodide. Specifications

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 4328-77: Reagents. Sodium hydroxide. Specifications

GOST 4517-87: Reagents. Methods for preparation of accessory reagents and solutions used for analysis

GOST 61-75: Reagents. Acetic acid. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

The Document is Referenced By:

GOST 10062-75: Natural combustible gases. Method for determination of specific heat of combustion

GOST 10153-70: High refractory silicon carbide products. Specifications

GOST 11022-90: Solid mineral fuels. Methods for the determination of ash

GOST 11022-95: Solid mineral fuels. Methods for determination of ash

GOST 11930.1-79: Hard-facing materials. Methods of carbon determination

GOST 11930.2-79: Hard-facing materials. Method of sulphur determination

GOST 12.1.044-84: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12.4.249-2013: Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking

GOST 12099-75: Copolymer BA-15 vinyl chloride and vinyl acetate. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 1293.16-93: Lead-antimony alloys. Methods for determination of sulphur

GOST 13047.2-81: Nickel. Methods for the determination of carbon

GOST 13047.3-81: Nickel. Methods for the determination of sulphur

GOST 13047.6-2002: Nickel. Cobalt. Methods for determination of carbon

GOST 13047.6-2014: Nickel. Cobalt. Method for determination of carbon

GOST 13047.7-2002: Nickel. Cobalt. Methods for determination of sulphur

GOST 13047.7-2014: Nickel. Cobalt. Methods for determination of sulphur

GOST 14250.2-80: Ferrotitanium. Methods for determination of carbon

GOST 14250.3-80: Ferrotitanium. Method for determination of sulphur

GOST 14338.1-82: Molybdenum. Methods for determination of carbon

GOST 14338.2-82: Molybdenum. Method for determination of sulphur

GOST 14339.1-82: Tungsten. Methods for the determination of carbon

GOST 14339.2-82: Tungsten. Method for the determination of sulphur

GOST 147-2013: Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value

GOST 147-95: Solid mineral fuel. Determination of the highest combustion heat and calculation of the lowest combustion heat

GOST 15483.7-78: Tin. Method for determination of sulphur

GOST 15848.4-70: Chromium ores and concentrates. Methods for determination of total carbon

GOST 15848.6-70: Chromium ores and concentrates. Methods for determination of sulphur

GOST 16412.5-80: Iron powder. Methods for the determination of sulphur

GOST 16412.5-91: Iron powder. Methods for the determination of sulphur

GOST 16412.7-80: Iron powder. Methods for the determination of carbon

GOST 16412.7-91: Iron powder. Methods for the determination of carbon

GOST 16539-79: Reagents. Cupric oxide. Specifications

GOST 18136-2017: Masla. Metod opredeleniya stabil'nosti protiv okisleniya

GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus

GOST 18172-80: Yellow iron oxide pigment

GOST 18184.3-79: Niobium pentoxide. Method for the determination of sulphur content

GOST 18184.7-79: Niobium pentoxide. Method for the determination of potassium and sodium content

GOST 18262.13-88: Titan magnetite ores, iron vanadium concentrates, agglomerates and pellets. Methods for determination of sulphur

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 1953.12-79: Tin bronze. Methods for the determination of sulphur

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 20242-74: Additives and oils containing additives. Method for determination of chlorine

GOST 2059-95: Solid mineral fuel. Determination of total sulphur. High temperature combustion method

GOST 20841.2-75: Silicon organic products. Methods for determination of silicon mass fraction

GOST 21261-75: Petroleum products. Method for determination of specific heat of combustion

GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value

GOST 21448-75: Alloyed powders for welding deposit. Specifications

GOST 21449-75: Rods for welding deposit. Specifications

GOST 21639.1-90: Fluxes for electroslag remelting. Methods for determination of moisture content

GOST 21639.9-93: Fluxes for electroslag remelting. Method for determination of carbon

GOST 21793-76: Plastics. Method for determination of the oxygen index

GOST 21907-76: Zirconium dioxide. Specifications

GOST 21957-76: Cryogenic engineering. Terms and definitions

GOST 22025-76: Resistive silicon alloys. Specifications

GOST 22221.3-76: Tin concentrates. Methods for the determination of sulphur mass part

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22720.1-77: Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon

GOST 22720.3-77: Rare metals and their alloys. Method for the determination of carbon

GOST 22772.7-77: Manganese ores, concentrates and agglomerates. Methods for the determination of sulphur

GOST 22772.7-96: Manganese ores, concentrates and agglomerates. Methods for determination of sulphur

GOST 22898-78: Low-sulphur petroleum cokes. Specifications

GOST 22974.12-85: Melted welding fluxes. Method of sulphur determination

GOST 22974.12-96: Melted welding fluxes. Method of sulphur determination

GOST 22974.13-85: Melted welding fluxes. Method of carbon determination

GOST 22974.13-96: Melted welding fluxes. Method of carbon determination

GOST 22974.14-90: Melted welding fluxes. Method for determination of moisture content

GOST 23581.20-81: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of sulphur

GOST 23581.9-79: Iron ores, concentrates, agglomerates and pellets. Methods of the determination of carbon content

GOST 23740-79: Soils. Methods of laboratory determination of organic composition

GOST 23862.32-79: Rare-earth metals and their oxides. Methods of determination of fluorine

GOST 23862.36-79: Rare-earth metals and their oxides. Methods of determination of chlorine

GOST 23862.8-79: Lanthanum, cerium, ytterbium, lutetium, yttrium and their oxides. Chemical-spectral method of determination of impurities in oxides of rare earth elements

GOST 24018.7-91: Nickel-based fire-resistant alloys. Methods for the determination of carbon

GOST 24018.8-91: Nickel-based fire-resistant alloys. Methods for the determination of sulphur

GOST 2408.1-88: Solid fuel. Methods for the determination of carbon and hydrogen

GOST 2408.1-95: Solid fuel. Methods for determination of carbon and hydrogen

GOST 2408.4-98: Solid mineral fuels. Determination of carbon and hydrogen. High temperature combustion method

GOST 24896-2013: Live fish. Specifications

GOST 24975.2-89: Ethylene and propylene. Method for determination of sulphur

GOST 25702.11-83: Rare metallic concentrates. Method for the determination of sulphur

GOST 2604.2-86: Alloy cast iron. Methods for determination of sulphur

GOST 2642.15-97: Refractories and refractory raw materials. Method for determination of general carbon

GOST 26555-85: Rubber. Methods of carbon black content determination

GOST 27044-86: Coal coke. Methods for the determination of carbon and hydrogen content

GOST 27953-88: Detonation coatings. General requirements

GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 3022-80: Technical hydrogen. Specification

GOST 30355.1-96: Sulphur for industrial use. Determination of total carbon content. Titrimetric method

GOST 30771-2001: Refractory products containing carbon. Methods of testing

GOST 31382-2009: Copper. Methods of analysis

GOST 31512-2012: Medical monoplaced fixed barochambers. General technical requirements

GOST 31663-2012: Vegetable oils and animal fats. Determination of methyl esters of fatty acids by gaz chromatography method

GOST 31728-2012: Brandy distillates. Specifications

GOST 31728-2014: Distillate brandy. Technical conditions

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32465-2013: Solid mineral fuel. Determination of sulfur by IR spectrometry

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32599.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method

GOST 32710-2014: Alcoholic beverages and raw materials for its production. Identification. Method for determination of alcohols and sugars 13 C/12C isotopes ratio in wines and mashes

GOST 32980-2014: Solid mineral fuel. Determination of total mercury content

GOST 32982-2014: Solid mineral fuel. Determination of total fluorine content

GOST 33106-2014: Solid biofuel. Determination of calorific value

GOST 33108-2014: Solid fuel made from waste. Determination of calorific value

GOST 33210-2014: Copper-containing ore and polymetallic ores and derived products. Methods of measurement of the mass fraction of sulfur

GOST 33256-2015: Solid bio fuels. Determination of total sulphur and chlorine content

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33501-2015: Solid mineral fuel. Determination of total fluorine by combustion in calorimeter bomb with subsequent determination in solution by means of ion selective electrode

GOST 33502-2015: Solid mineral fuel. Determination of total chlorine by combustion in calorimeter bomb with subsequent determination in solution by means of ion selective electrode

GOST 33513-2015: Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method

GOST 33515-2015: Solid recovered fuel. Method for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 6263-2020: Chemical coking products. Method for determination of total sulfur

GOST 6263-80: Cool chemical products. Method for the determination of total sulphur

GOST 6689.10-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of carbon

GOST 6689.18-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of sulphur

GOST 7208-84: Grape wines. General specifications

GOST 741.2-80: Cobalt. Methods for the determination of sulphur

GOST 741.3-80: Cobalt. Method for the determination of carbon

GOST 9326-2002: Solid mineral fuels. Methods of chlorine determination

GOST 9326-90: Solid mineral fuel. Methods for determination of chlorine

GOST 9717.3-2018: Copper. Method of spectral analysis by oxide standard specimens

GOST 981-75: Mineral oils. Method for determination of oxidation stability

GOST 9827-75: Additives and additive containing oils. Method for determination of phosphorus

GOST 9853.3-86: Sponge titanium. Method for determination of carbon

GOST 9853.3-96: Sponge titanium. Methods for determination of carbon

GOST R 12.4.249-2009: Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking

GOST R 50233.1-92: Niobium pentoxide. Coulonometry method for determination of sulphur content

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 51145-2009: Brandy distillates. Specifications

GOST R 51145-98: Brandy spirits. Specifications

GOST R 51316-99: Medical monoplaced fixed barochambers. General technical requirements

GOST R 51471-99: Milk fat. Detection method of vegetable fat by gas-liquid chromatography of sterols

GOST R 51483-99: Vegetable oils and animal fats. Determination by gas chromatography of constituent contents of methyl esters of total fatty acid content

GOST R 52100-2003: Spreads and melted blends. General specifications

GOST R 52661-2006: Pulp, paper and board. Method for determination of total chlorine and organically bound chlorine content

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53256-2009: Fire equipment. Self-contained closed-circuit breathing apparatus with compressed oxygen. General technical requirements. Test methods

GOST R 53256-2019: Fire fighting equipment. Respiratory apparatus with compressed oxygen with a closed breathing cycle. General technical requirements. Test methods

GOST R 53263-2019: Fire fighting equipment. Compressor plants for filling compressed air and oxygen cylinders of breathing apparatus for firefighters. General technical requirements. Test methods

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 54215-2010: Solid biofuels. Determination of total content of sulphur and chlorine

GOST R 54216-2010: Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods

GOST R 54222-2010: Solid mineral fuels. Determination of total fluorine content

GOST R 54226-2010: Solid recovered fuels. Determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content

GOST R 54234-2010: Solid recovered fuels. Determination of carbon, hydrogen and nitrogen content by instrument methods

GOST R 54243-2010: Solid mineral fuel. Determination of total mercury content

GOST R 54263-2010: Pulp and paper production processes. Method for determination of absorbable organic halogen compounds (AOX) content in natural and waste waters of pulp and paper mills

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55685-2013: Blister copper. Methods of analysis

GOST R 56025-2014: Building materials. Test method of heat of combustion

GOST R 56756-2015: Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

GOST R 8.789-2012: State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification

GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

Manual: Manual for impulse and low consumption fire extinguishing systems

MI 2096-2009: Recommendation. State system for ensuring uniformity of measurements. Combustion calorimeters with a bomb (liquid). Method of verification

MUK 4.1.112-96: Recommended practice for the measurement of hexaphenyldisilane in the air of the working zone by the method of determination of the number of double bonds

MUK 4.4.1.011-93: Determination of volatile N-nitrosamines in food raw materials and food products. Guidelines for control methods

MVI 60-09: Methodology for measuring the anticorrosion characteristics of samples of mineral and flame-retardant (type OMTI) turbine oils

MVI 62-09: Methodology for measuring the mass fraction of sludge in samples of mineral energy oils

MVI 77-09: Methodology for measuring the mass fraction of dissolved sludge in samples of fire-resistant turbine oils of the OMTI type (OMTI)

NPB 164-2001: Fire equipment. Oxygenous self-contained gas-masks for fireman. General technical requirements. Test methods

NPB 185-99: Fire equipment. Fire fighting centrifugal pumps. General technical requirements. Test methods

NTP 24-94: Norms of technological design of hydrogen production by the method of water electrolysis

ONTP 06-95: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization, automation, and office equipment

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-04-312-83: Degreasing methods. General requirements for technological process.

OST 26-04-538-79: Air separation plants. General requirements for assembly

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties

RD 153-34.1-44.222-2001: Solid mineral fuel. The method of sampling gaseous emissions of power plants during the combustion of solid fuels to determine the concentration of mercury vapor. Methods for measuring the mass concentration of mercury using flameless atomic absorption

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes

RD 31.55.03.02-86: Marine diesel engines of foreign and domestic construction. Steel piston heads of working cylinders. Restoration by surfacing, followed by friction hardening of the ends of the grooves of the piston rings

RD 31.84.01-90: Uniform occupational safety rules for diving operations

RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.44.206-93: Petroleum Fuel. Method for the Determination of Hydrogen

RD 34.44.207-97: Solid Fuel. Determination of Nitrogen by Gasification Method

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 52.24.626-2001: Guidelines. Monitoring of pollution of bottom sediments with industrial wastewater from the Baikal Pulp and Paper Mill. Methods for measuring the carbon isotope composition of organic matter by mass spectrometric analysis. Hydrochemical Institute (GHI)

RD RTM 26-362-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of iron and steel

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-02-93: Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SNiP II-45-75: Main pipelines

SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 36.13330.2012: Trunk pipelines

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

ST TsKBA 046-2007: Pipe fittings. Degreasing methods

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

STB 1695-2006: Fruit fortified vintage wines of improved quality and special process and fortified vintage fruit wine materials, improved quality and processed under special technology. General specifications

STB GOST R 51471-2008: Milk fat. Method for detection of vegetable fats by gas liquid chromatography of sterols

TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15

VNTP 1-34-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 10. Oxygen Management

VNTP 20-1-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Volume 30. Refractory Plants

VSN 139-83: Guidelines for the Termination, Connection, and Branching of Aluminum and Copper Conductors of Insulated Wires and Cables and for Their Connection to Contacts of Electrical Installations

VSN 2-120-80/Minneftegazstroj: Instructions on the technology for welding pipelines and technological equipment during the installation of compressor and pumping stations

VSN 415-81: General Specified Quantity Allowances for Building Materials. Compendium 19: Installation of Domestic Heating, Water Supply, Drainage, and Gas Supply Systems

VSN 467-85: General Specified Quantity Allowances for Building Materials. Compendium 7: Installation of Metal Structures for Tanks and Gasholders

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!