GOST 7930-73

ГОСТ 7930-73

Enamels НЦ-1125. Specifications

Эмали НЦ-1125. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to NTs-1125 enamels, which are a suspension of dry-rolled pastes (SVP - a pigment expanded with nitrocellulose, a plasticizer and a dispersant), and for protective enamel a suspension of pigments in a solution of colloxylin and alkyd resin in volatile organic solvents with the addition of plasticizers. Designed for painting pre-primed metal surfaces of specialized trucks. Applied to the surface by spraying.

Стандарт распространяется на эмали НЦ-1125, представляющие собой суспензию суховальцованных паст (СВП - пигмент, развальцованный с нитроцеллюлозой, пластификатором и диспергатором), а для эмали защитного цвета - суспензию пигментов в растворе коллоксилина и алкидной смолы в летучих органических растворителях с добавлением пластификаторов. Предназначены для окраски предварительно загрунтованных металлических поверхностей специализированных грузовых автомобилей. Наносятся на поверхность методом распыления.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: Gosstandart of the USSR, 5/15/1973

SKU: RUSS57186

Price: $158.00

English keywords: lucky; paints; paints and varnishes;

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.6 Coating Materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L24 Varnish and enamel »

As a Replacement Of:

GOST 7930-56: Nitro enamels for truck vehicles

The Document References:

GOST 10054-75: Water-resistant abrasive paper

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 3584-73: Wire mesh woven with square check and high precision. Specification

GOST 4765-59: Paints and varnishes. Test methods. Determination of the strength of the films upon impact

GOST 5233-67: Paints and varnishes. Method for determining the hardness of the coating on a pendulum device

GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'

GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending

GOST 683-75: Glass for photographic plates specification

GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings

GOST 8784-75: Paint materials. Methods for determination of hiding power

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9980-75: Pain and lacquer materials. Acceptance rules. Test sampling. Packing, marking, transportation and storage

The Document is Referenced By:

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 18711-73: Wooden parts for tents. General technical requirements

GOST 21448-75: Alloyed powders for welding deposit. Specifications

GOST 21449-75: Rods for welding deposit. Specifications

GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties

GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 34.35.619: Pressure Gauges, Vacuum Gauges, and Pressure-and-Vacuum Gauges Type MED, Interchangeable Spring-Loaded with Unified Electrical Output Signal. Guide to Overhaul

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82


TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!