GOST 8832-76
ГОСТ 8832-76
|
|
Paintwork materials. Methods for formation of paint coating for testing
Материалы лакокрасочные. Методы получения лакокрасочного покрытия для испытания
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1860 dated 12/05/91
The standard applies to paints and varnishes and establishes methods for producing paint coatings on metal, glass, wood or other surfaces.
Стандарт распространяется на лакокрасочные материалы и устанавливает методы получения лакокрасочного покрытия на металлической, стеклянной, деревянной или другой поверхности.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 16
Approved: Gosstandart of the USSR,
1/21/1976
SKU: RUSS67772
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L19 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 8832-58: Paints and varnishes. Test methods. Methods of preparation of paint coating on the substrate
The Document References:
GOST 10054-82: Water-resistant abrasive paper
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 13345-85: Tin-plate and black plate
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18124-95: Asbestos cement flat sheets. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19592-80: Fibre boards. Test methods
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 2590-88: Round steel bars. Dimensions
GOST 2768-84: Acetone technical. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 27935-88: Fibre and wood particle boards terms and definitions
GOST 3134-78: White spirit
GOST 4598-86: Fibre boards. Specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5638-75: Copper roll foil for technical purposes. Specifications
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 6456-82: Abrasive paper
GOST 6613-86: Square meshed woven wire gauzes
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 7417-75: Calibrated round steel
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
TU 21-0284461-058-90: Glass plates for special purposes
TU 38.401-67-108-92: Gasoline-solvent for the rubber industry. Technical conditions
The Document is Referenced By:
GOST 10144-74: Enamels ХV-124 and ХV-125. Specification
GOST 10144-89: Enamels XB-124Specifications
GOST 10277-90: Putties. Specifications
GOST 10503-71: Oil paints, ready for use. Specifications
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12034-2020: Enamels of the ML-165, ML-165PM and MS-160 brands. Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 14243-78: Paintwork materials. Methods for formation of free films
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 16976-71: Coatings of lacquers and paints. Method for determination of chalking degree
GOST 1709-75: Coal-tar vanishes. Specifications
GOST 18099-78: Enamels ML-152. Specifications
GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19024-79: Enamels AC-182. Specifications
GOST 19214-80: Water dispersion paints for interior works. Specifications
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 20833-75: Water-dispersion paints for exterior works. Specifications
GOST 21227-2021: Enamels of the PF-218 brands. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21513-76: Paint materials. Methods for determination of paint film. Water - and moisture absorptivity
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 21826-76: Paint and lacquer materials. Method for testing coatings for resistance to the action of solutions and alkalis
GOST 21903-76: Paint materials. Methods of relative light-fastness determination
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23123-78: Silvery enamel KO-83. Specifications
GOST 23143-78: Enamels ЭП-773. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23171-78: Enamel AK-512. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 2346-78: Enamel BT-123. Specification
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25129-2020: Primer GF-021. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-2022: Primers AK-069, AK-070 and AK-070 M. Technical conditions
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 27037-86: Paint materials. Method of determination of stability to temperature changes
GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method
GOST 28196-89: Water-dispersion paints
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 29309-92: Coating of lacquers and paints. Determination of strength under the tension
GOST 29318-92: Paints and varnishes. Evaluation of compatibility of a product with a surface to be painted. Methods of test
GOST 29319-92: Paints and varnishes. Visual comparison of the colour of paints
GOST 30704-2001: Wood protective substances. Quality testing methods
GOST 30884-2003: Ready-mixed oil paints. General specifications
GOST 31093-2003: Paints and varnishes for furniture. General specifications
GOST 31149-2014: Paint and varnish materials. Determination of adhesion by the method of cross-cut
GOST 312-79: Varnish БТ-5100. Specifications
GOST 31974-2012: Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST 31975-2017: Paint materials. Method for determining the gloss of paint coatings at an angle of 20 °, 60 ° and 85 °
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32299-2013: Paint materials. Pull-off test for adhesion
GOST 32389-2013: Boiled oils. General specifications
GOST 32702.2-2014: Paint materials. Determination of adhesion by X-cut test method
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 33290-2015: Paint materials used in building. General specifications
GOST 33291-2015: Paint materials. Method for determination of the effect of heat
GOST 33354-2015: Paint materials being in contact with food products. General specifications
GOST 4.86-83: System of product indices. Decontaminable protective polymeric coatings. Nomenclature of indices
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 482-77: Zink oxide oil paste. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 6993-79: Enamels HV-1100. Specification
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7930-73: Enamels НЦ-1125. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 896-2021: Paint and varnish materials. Determination of luster of paints and varnishes. Photoelectric method
GOST 9.042-75: Unified corrosion and ageing protection system. Inhibited polymer coatings. Methods of accelerated corrosion test
GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification
GOST 9640-75: Enamels ЭП-51
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-2020: Enamels ML-12. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 50500-93: Paints and varnishes. Bend test (conical mandrel)
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51691-2008: Paint materials. Enamels. General specifications
GOST R 51692-2000: Boiled oils. General specifications
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 51694-2000: Paints and varnishes. Determination of film thickness
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52165-2003: Paint materials. Varnishes. General specifications
GOST R 52166-2003: Paints and varnishes. Determination of hardness by pendulum damping test
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52662-2006: Paint materials. Colorimetry. Part 2. Colour measurement
GOST R 52740-2007: Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST R 53007-2008: Paint materials. Rapid deformation (impact resistance) test method
GOST R 53202-2008: Paint materials being in contact with food products. General specifications
GOST R 53651-2009: Paint materials. Method for determination of the effect of heat
GOST R 54563-2011: Paint materials. Determination of adhesive by cross-cut method
GOST R 54586-2011: Paint materials. Method for determination of paint film hardness by pencil test
GOST R 58346-2019: Steel pipes and fittings for the oil industry. Protective coatings on the inner surface. General technical requirements
GOST R 59952-2021: Paint and varnish materials. Technical specifications. General requirements for design and execution
GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications
GOST R 9.414-2012: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST R 9.804-2006: Unified system of corrosion and ageing protection. Products and materials. Methods of laboratory testing for the stability in regards to the deterioration by rodents
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
PNST 407-2020: Green standards. Styrene-acrylic nanodispersions. Criteria and indicators for confirming the conformity of "green" products
PNST 66-2015: Nanomodified antibacterial acrylic paint. Specifications
RD 39-30-1093-84: Methodology for the accelerated assessment of the service life of polymer coatings to protect oilfield equipment from corrosion
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
TU 1390-008-86695843-2011: Steel pipes with internal smoothing coating for gas pipelines
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
TU 6-10-1052-75: Enamel VL-515 red-brown
TU 6-10-1117-85: Primer EP-057 Protector
TU 6-10-1270-87: Varnish BT-5101
TU 6-10-741-79: PF-167 enamel of various colors
TU 6-10-778-76: Enamel FL-412 (former FL-723) FL-61 (former FL-724) silver
TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum
VRD 39-1.10-030-2001: Method for determining the quality of polymer adhesive internal coatings after exposure to corrosive environments by autoclave testing
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
TurkmenistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.